p+f倍加福超聲波雙張檢測器

超聲波雙張檢測器適用于識別：

• 無紙，單張或雙張紙
• 基底材料
• 帶標簽的基底材料

倍加福超聲波雙張檢測器用于自動和高速地分辨基底材料，標簽，單張紙和雙張紙，從而達到保護機器防止生產過程中的浪費。整個系統包括一個超聲波發射器，一個超聲波接收器和一個外置或者內置在接收器里的處理器。這些組件出廠時已經配置完好，不能分開來使用。

產品特點:

• 可檢測范圍從30g/m2的紙到2000 g/ m2的硬紙板
• 也可檢測塑料或者金屬薄片
• 對不同的材料可以進行設定
• 可適用于光滑或者透明的材料
• 環境緩慢變化時能自動補償
• 處理速度高
• 對污物和灰塵不敏感

典型應用包括:

• 應用于印刷機，超聲波雙張檢測防止不經意的輸送兩張紙，以至于損壞精密的機械機構，或確保第二張紙不在機器里
• 檢測標簽是否貼在底材上以及標簽機貼標簽的計數
• 應用在拆信機上以確定打開的信封全空
• 應用在賬單計數的機器上超聲波雙張檢測可確定銀行的賬單是否被正確地計數
• 應用在包裝機械上來檢測兩張紙的結合點，以調節機器的進度
• 用于紙?zhí)幚頇C(jī)械，檢測無紙，單張紙和雙張紙

倍加福超聲波雙張檢測器

產品	簡介
Splice sensor UDBK-18GM35-3E2	Ultrasonic system for detection of single and pasted double sheet., Weights of paper from 30 g up to cartons weighing over 1200 g can be detected., It is also possible to detect thin metal and plastic films., Series: -UDB, Diameter of the housing: 18 mm, Output type: 3 switch outputs pnp, NO, Connection: emitter: V1-W connector with 2.5 m cable receiver: 2.5 m fixed cable （not disconnectable） S1,S2: 2 connectors V1-W, M12x1 （included with delivery）, Operating voltage: 20 ... 30 V DC , ripple 10 % SS
Double sheet sensor UDC-18GM50-255-3E1	Ultrasonic system for reliable detection of no, one, or two overlapping sheet materials, preferably papers, Short version, No TEACH-IN required, Series: -UDB, Diameter of the housing: 18 mm, Output type: 3 switch outputs npn, NC, Connection: 2 m, PVC cable 0.14 mm², Operating voltage: 18 ... 30 V DC , ripple 10 % SS, Sensing range: 20 ... 60 mm , optimal distance: 45 mm, Sensing range: 20 ... 60 mm , optimal distance: 45 mm, Output type: 3 switch outputs npn, NC
Double sheet sensor UDC-18GM50-255-3E3	Ultrasonic system for reliable detection of no, one, or two overlapping sheet materials, preferably papers, Short version, No TEACH-IN required, Series: -UDB, Diameter of the housing: 18 mm, Output type: 3 Switch outputs pnp, normally-closed, Connection: 2 m, PVC cable 0.14 mm², Operating voltage: 18 ... 30 V DC , ripple 10 % SS, Sensing range: 20 ... 60 mm , optimal distance: 45 mm, Sensing range: 20 ... 60 mm , optimal distance: 45 mm, Output type: 3 Switch outputs pnp, normally-closed
Double material sensor UDC-18GM50-255S-3E0	Ultrasonic system for reliable detection of no, one, or two overlapping sheet materials, Short version, No TEACH-IN required, Series: -UDB, Diameter of the housing: 18 mm, Output type: 3 switching outputs npn, NO, Connection: 2 m, PVC cable 0.14 mm², Operating voltage: 18 ... 30 V DC , ripple 10 % SS, Sensing range: 40 ... 100 mm optimal distance 75 mm, Sensing range: 40 ... 100 mm optimal distance 75 mm, Output type: 3 switching outputs npn, NO, Operating voltage: 18 ... 30 V DC , ripple 10 % SS
Double sheet sensor UDC-18GM50-400-3E3-Y222564	Ultrasonic system for reliable detection of no, one, or two overlapping sheet materials, preferably papers, Short version, No TEACH-IN required, Series: -UDB, Diameter of the housing: 18 mm, Output type: 3 Switch outputs pnp, normally-closed, Connection: 2 m PVC cable 0.14 mm², Operating voltage: 18 ... 30 V DC , ripple 10 % SS, Sensing range: 20 ... 60 mm , optimal distance: 45 mm, Sensing range: 20 ... 60 mm , optimal distance: 45 mm, Output type: 3 Switch outputs pnp, normally-closed
Splice sensor UGB-18GM50-255-2E3-150MM-V15-Y	Ultrasonic system for splice detection, Sensor with mounting bracket, preassembled, Insensitive to printing, colours, and shining surfaces, Series: Ultrasonic splice control, Diameter of the housing: 18 mm, Output type: 2 switch outputs pnp, NC, Connection: 0.15 m PVC cable with connector M12 x 1 , 5 pin, Operating voltage: 18 ... 30 V DC , ripple 10 % SS, Sensing range: 20 ... 60 mm , optimal distance: 45 mm, Sensing range: 20 ... 60 mm , optimal distance: 45 mm, Output type: 2 switch outputs pnp, NC
Splice sensor UGB-18GM50-255-2E3-Y216407	Ultrasonic system for splice detection, Short version, Insensitive to printing, colours, and shining surfaces, Series: Ultrasonic splice control, Diameter of the housing: 18 mm, Output type: 2 switch outputs pnp, NC, Connection: 10 m, PVC cable 0.14 mm², Operating voltage: 18 ... 30 V DC , ripple 10 % SS, Sensing range: 20 ... 60 mm , optimal distance: 45 mm, Sensing range: 20 ... 60 mm , optimal distance: 45 mm, Output type: 2 switch outputs pnp, NC, Operating voltage: 18 ... 30 V DC , ripple 10 % SS
Label sensor ULB-18GM50-255-2E1	Ultrasonic system for detection of labels and carrier materials., Short version, Insensitive to printing, colours, and shining surfaces, Series: Ultrasonic label control, Diameter of the housing: 18 mm, Output type: 2 switch outputs npn, NC, Connection: 2 m, PVC cable 0.14 mm², Operating voltage: 18 ... 30 V DC , ripple 10 % SS, Sensing range: 20 ... 60 mm , optimal distance: 45 mm, Sensing range: 20 ... 60 mm , optimal distance: 45 mm, Output type: 2 switch outputs npn, NC
Label sensor ULB-18GM50-255-2E1-Y193959	Ultrasonic system for detection of labels and carrier materials., Short version, Insensitive to printing, colours, and shining surfaces, Series: Ultrasonic label control, Diameter of the housing: 18 mm, Output type: 2 switch outputs npn, NC, Connection: 5 m, PVC cable 0.14 mm², Operating voltage: 18 ... 30 V DC , ripple 10 % SS, Sensing range: 20 ... 60 mm , optimal distance: 45 mm, Sensing range: 20 ... 60 mm , optimal distance: 45 mm, Output type: 2 switch outputs npn, NC
Label sensor ULB-18GM50-255-2E3	Ultrasonic system for detection of labels and carrier materials., Short version, Insensitive to printing, colours, and shining surfaces, Series: Ultrasonic label control, Diameter of the housing: 18 mm, Output type: 2 switch outputs pnp, NC, Connection: 2 m, PVC cable 0.14 mm², Operating voltage: 18 ... 30 V DC , ripple 10 % SS, Sensing range: 20 ... 60 mm , optimal distance: 45 mm, Sensing range: 20 ... 60 mm , optimal distance: 45 mm, Output type: 2 switch outputs pnp, NC